Mustang Catch Can Install
I was having some issues with some oil getting back into the intake via the PCV valve so I descided to add a catch can. The catch can’s job is to do just what it says, catch junk that may pass through the PCV before the air is recycled back into your intake. I grabbed a crappy can off eBay and modified it to fit my needs. The first thing I did was disassemble the unit, it was put together like crap. I re-threaded and sealed all the connections and tested it to hold pressure. I also dilled out a few of the connections to support more air volume.
This pic is after I drilled it out, the holes before were 1/2 the size.
Everything re-sealed and ready to go…
The clear tube so you can see how full the can is.
The bracket mounted….
The final mounting and lines hooked up…
Welcome to Burm.net