XenServer Tips and Tricks – Auto Start Your VM

Posted on the January 28th, 2012 under Interesting,Tutorials,Xen,XenServer by

Figured I’d share a few of my notes from firing up a XenServer instance…  I went through lot of research before deciding to go with XenServer versus just firing up Xen on Debian, but thats for another post. The main reason I setup this server was to move off of Linode because I was at the point where it just made sense cost wise, essentially I have a more powerful server for way less money.  Granted, you do loose some of the conveniences of Linode  (simple management/upgrade/backup).  Anyways, onto XenServer…

When using the free edition of XenServer 6.0, you’ll want to do a few things such as enabling Auto Start / Auto Boot / Auto Power On.  For some reason this feature was removed from the “Free” version in 6.0, so lets go ahead and set this up.

First your going to want to get the UUID of the VM’s you wish to enable auto start on as well as the UUID of the pool these VM’s reside in.

To get the list of the pool’s on your XenServer type:

xe pool-list

Copy the UUID of the pool, in my case there ist just one pool. Then issue the following command, and replace the UUID with your pools UUID.

xe pool-param-set uuid=UUID other-config:auto_poweron=true

Then, at the command prompt of your XenServer type:

xe vm-list

You should get a full list of the VM’s on the server, along with their name and UUID. Copy the UUID of the VM you wish to enable autostart then issue the command below, again replacing the UUID with the UUID of the VM you wish to auto start.

To Auto Start your Pool (replace UUID with the UUID of your Pool):
xe pool-param-set uuid=UUID other-config:auto_poweron=true
To Auto Start your VM (replace the UUID with the UUID of your VM):
xe vm-param-set uuid=UUID other-config:auto_poweron=true

xe vm-param-set uuid=UUID other-config:auto_poweron=true

And thats it, the next time you ever need to power cycle your main server, the Xen instances should power up automatically.

I’ll be adding a few more articles over the next few weeks of some other notes and tips.  Next up is adding some monitoring to your main XenServer to see whats going on with your different instances.


New roof going on the house today!

Posted on the December 16th, 2010 under house,Remodeling by

I have a new roof going on the house today.  After a few weeks of getting quotes, and finding the right roofing guy for the right price its finally going on.  We are also getting rid of one skylight towards the back of the house.   Reason for dumping the skylight is that I need to built a wall and the skylight would have been right in the middle of where the wall is going.  Some before / in progress pictures are below.  I’ll have some after shots later today / tomorrow.

IMG_0350

IMG_0351

IMG_0352

Detailed the ATV and Fixed some things…

Posted on the May 6th, 2010 under Interesting,My Projects,Upstate by

I finished up the main detailing to get rid of all the oxidation.  I started to work on some of the corroded wiring and other problems. I had a really hard time getting off some of the body screws because they were so rusted.

All cleaned up:

IMG_9961

IMG_9959

Bus connector fix (common problem on 2005 and 2006 Kawasaki Brute Force 750’s)

IMG_9970 IMG_9972

Took the wires out of this plug, stripped then soldered.

IMG_9976 IMG_9979

Then taped them up nice and secure…

IMG_9981